PTS530 GN055 SMTR LFS

PTS530 Series Ultra Low Profile SMT Top Actuated Features/Benefits • 4.5 x 4.5 mm footprint • 0.55 mm thickness • High number of cycles • Symbol line identification Typical Applications • MP3 accessories • Bluetooth headset • Remote controls • Garage door opener B Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: Gullwing for SMT TRAVEL: 0.2mm - 0.1 /+ 0.15mm MAXIMUM VOLTAGE: 12 VDC MAXIMUM CURRENT DC: 50 mA DIELECTRIC STRENGTH: 250 VA C (1mn) CONTACT RESISTANCE: ≤ 100 mΩ INSULATION RESISTANCE: ≥ 100 MΩ BOUNCE TIME: ≤ 10 ms Part Number PTS530 GN055 SMTR LFS Operating Force (gf) 100 ± 30 160 ± 30 200 ± 30 260 ± 30 400 ± 70 600 - 50/+100 PTS530 GM055 SMTR LFS PTS530 GH055 SMTR LFS PTS530 GK055 SMTR LFS PTS530 GG065 SMTR LFS PTS530 GS065 SMTR LFS Packaging Operating Life (operations) 1,000,000 1,000,000 200,000 200,000 300,000 150,000 Environmental OPERATING TEMPERATURE: -40˚C to 85˚C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 NOTE: Switches in reels of 7,000 pieces. Dimensions of reels according to EIA 481B External diameter 330 mm • Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 5 3 0 G S M T L F S LFS RoHS, silver plated Termination G Gullwing Actuation Force N 100 gf M 160 gf H 200 gf K 260 gf G 400 gf S 600 gf R Packaging SMTR Tape & reel Body Type 055 0.55mm height for 100, 160, 200 and 260 gf 065 0.65mm height for 400 and 600 gf Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–37 www.ckswitches.com www.ckswitches.com Tactile Switches Specifications PTS530 Series Ultra Low Profile SMT Top Actuated TERMINATION G 4,65 GULLWING BODY TYPE / ACTUATION FORCE Actuation force identification lines: 0,55 MM HEIGHT +0,20 4,5 -0,15 4,2 2 4 3 N: 100 gf 2 1 4x0,5 3,5 4,5 +0,25 -0,15 1 3,3 2 0,55±0,15 2,4 055 Tactile Switches M: 160 gf 4 3 SCHEMATIC No Lines 4,85 2,85 1 2 H: 200 gf 2 ,8 4,2 065 3 0,65 MM HEIGHT 4 ALTERNATIVE PCB LAYOUT +0.1 HEIGHT -0.05 PART NUMBER PTS 530 GS 065 SMTR LFS 0.72 PTS 530 GG 065 SMTR LFS 0.68 1 K: 260 gf 3 4, 8 2 4 2,85 4,85 RECOMMENDED PCB LAYOUT H 3 4,65 -0,15 4,5 +0,25 4,2 (3,3) (2) 2 3 (2, 4) Restriction in operation 0 ± 0,2 ø1 90˚ ± 3˚ R1 4x0,5 3,5 4,5 1 +0,10 0,65 -0,05 G: 400 gf No Lines S: 600 gf 4 Force symbol lines for 600 gf No symbol line for 400 gf TAPE & REEL 18,4 Max 12,4+2 0 330 13± 0,5 2±0,5 2 9,3 Cover tape 12±0,3 1,75 4 1,5 5,5 B 21± 0,8 SEE DETAIL A 8 CARRIER TAPE DETAIL A SCALE 0,5 REEL Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–38 www.ckswitches.com